Menu
Long Stroke Nut Formers

Features:

1.Annealed body and basic, forged components are free from residual stress, which are sturdy, durable and stable when in operation.

2.One-piece-formed main slide is made of alloy steel imported from Europe. Tolerance of micro-adjustable protecting plate:0.015-0.02mm. --Cast iron protecting plate, with 2-3hand-carved grooves on the surface, is well-lubricated, heat-dissipated and wear-resistant to protect main slide. --High-precision main slide features stable and high capacity. Equipped with wear-resistant punches and dies, this model is durable and cost-efficient.

3.The HRC60, hard chrome-plated crankshafts on both sides of the nut former and main spindle in the center are made of alloy brass, which are durable, impact-proof, heavy-duty, and wear-resistant.

4.Well-organized punch table are easy to adjust and can be adjusted separately from left to right, up and down. Even an inexperienced operator can easily adjust/replace dies/punches.

5.Front kick-out mechanism is easy-t0-operate and its movement can easily be synchronized with the reversing movement of main slide, which keeps work pieces in the dies.

6.The round, clean-cut section is vertical to feeding mechanism and cooperates with the forming process. Meanwhile, a non-reversible bearing is installed in the feeding mechanism to prevent material reversing, ensuring the stability of feeding mechanism.

7.Quick-change nut-clipping table and clip piece-positioning mechanism, plus adjustable lid on the shaft of clip pieces enhance nut former capacity.

8. Automatically controlled devices:

a. Overload ammeter b. Material running-out detection c. Product quantity-presetting detection
d. Kick-out detection e. Lubricant shortage detection f. Engine overheat detection
g. LCD RPM display h. LCD interface control (optional)  
i. Highly efficient motor, converter installation is optional

Products made with six-die long-stroke nut shapers and tube shapers

Features:

1. Uni-body SCM4340 alloy steel tube cutter.

2. Uni-body and heat-treated sliding table made of HRC56 seeel alloy imported from Europe.

3. Heavy-duty, impact-and-wear-resistant cast iron punch connecting rod w/brass alloy sleeves.

Specification :

Six-die long-stroke nut shapers – SL Series
SPCIFICATION / MODEL 11B-6SL 14B-6SL 19B-6SL 22B-6SL 24B-6SL 32B--6SL 36B-6SL 41B-6SL 45B-6SL
FORGING STATION (MM) 6 6 6 6 6 6 6 6 6
CUT-OFF DIA. MAX. (MM) 12 15 20 22 26 32 36 42 46
CUT-OFF LENGTH MAX. (MM) 30 45 60 70 75 85 90 95 100
P.K.O. LENGTH MAX. 10 14 19 22 24 32 36 41 45
KICK-OUT LENGTH MAX. (MM) 38 53 68 78 88 105 113 123 128
CUT-OFF QUILL (DXL) (MM) 27×30 35×40 47×40 50×50 58×60 78×70 98×80 118×90 128×100
MAIN DIE HOLE (DXL) (MM) 40×40 50×60 65×80 75×90 85×100 105×110 120×120 140×130 150×140
DIES PITCH (MM) 50 60 78 90 100 126 145 168 180
PUNCH HOLE (DXL) (MM) 30×73 40×120 55×160 60×165 70×195 80×210 90×230 100×250 120×270
RAM STROKE (MM) 100 150 200 220 240 280 320 340 360
FORGING POWER (TON) 50 95 170 250 320 450 550 700 800
PRODUCTS SPECIFICATION Φ11×35 Φ14×50 Φ20×65 Φ22×75 Φ26×85 Φ32×100 Φ36×110 Φ42×120 Φ45×125
NUT M5 M8 M12 M14 M16 M24 M27 M30 M33
MAX. OUTPUT (PCS / MM) 90 80 70 70 65 60 55 50 50
MAIN MOTOR (HP) 20 40 50 75 100 150 200 250 300
LUBRICANT MOTOR (HP) 1 1 1 2 2 2 2 2 2
COOLANT MOTOR (HP) 0 0 1 1 1 1 1 1 1
LUBRICANT OIL (L) 150 150 200 250 350 350 400 400 450
COOLANT OIL (L) 80 100 150 150 150 200 250 250 250
AIR PRESSURE(KG/CM) 4 4 4 5 5 5 5 5 5
APPROX. WT. (TON) 6.5 10 20 30 38 58 80 110 130
MACHINERY SIZE (M) 3.0×1.8 3.6×2.1 5.0×2.6 5.5×3.0 6.3×3.3 7.35×3.9 7.7×4.2 9.8×5.0 8.5×5.5
Six-die long-stroke nut shapers – S Series
SPCIFICATION / MODEL 11B-6S 14B-6S 19B-6S 22B-6S 24B-6S 32B--6S 36B-6S 41B-6S 45B-6S
FORGING STATION (MM) 6 6 6 6 6 6 6 6 6
CUT-OFF DIA. MAX. (MM) 12 15 20 22 26 32 36 42 46
CUT-OFF LENGTH MAX. (MM) 15 20 35 40 45 50 55 60 65
P.K.O. LENGTH MAX.(MM) 10 14 19 22 24 32 36 41 45
KICK-OUT LENGTH MAX. (MM) 23 28 43 48 55 58 63 68 73
CUT-OFF QUILL (DXL) (MM) 27×30 35×40 47×40 50×50 58×60 78×70 98×80 118×90 128×100
MAIN DIE HOLE (DXL) (MM) 40×40 50×60 65×80 75×90 85×100 105×110 120×120 140×130 150×140
DIES PITCH (MM) 50 60 78 90 100 126 145 168 180
PUNCH HOLE (DXL) (MM) 30×73 40×120 55×160 60×165 70×195 80×210 90×230 100×250 120×270
RAM STROKE (MM) 80 90 120 140 150 160 180 190 200
FORGING POWER (TON) 50 95 170 250 320 450 550 700 800
PRODUCTS SPECIFICATION Φ11×20 Φ16×25 Φ20×40 Φ22×45 Φ26×50 Φ32×55 Φ36×60 Φ42×65 Φ45×70
NUT M5 M8 M12 M14 M16 M24 M27 M30 M33
MAX. OUTPUT (PCS / MM) 140 125 100 85 80 70 65 55 55
MAIN MOTOR (HP) 20 30 50 75 100 150 200 250 300
LUBRICANT MOTOR (HP) 1 1 1 2 2 2 2 2 2
COOLANT MOTOR (HP) 0 0 1 1 1 1 1 1 1
LUBRICANT OIL (L) 150 150 200 250 350 350 400 400 450
COOLANT OIL (L) 80 100 150 150 150 200 250 250 250
AIR PRESSURE(KG/CM) 4 4 4 5 5 5 5 5 5
APPROX. WT. (TON) 6 8.5 18 26 34 53 72 102 120
MACHINERY SIZE (M) 3.0×1.8 3.6×2.1 5.0×2.6 5.5×3.0 6.3×3.3 7.35×3.9 7.7×4.2 9.8×5.0 8.5×5.5
Language
Main Menu