Menu

14B Long Stroke Nut Formers

Features:

1. Annealed body and basic, forged components are free from residual stress, which are sturdy, durable and stable when in operation.

2. One-piece-formed main slide is made of alloy steel imported from Europe. Tolerance of micro-adjustable protecting plate:0.015-0.02mm. --Cast iron protecting plate, with 2-3hand-carved grooves on the surface, is well-lubricated, heat-dissipated and wear-resistant to protect main slide. --High-precision main slide features stable and high capacity. Equipped with wear-resistant punches and dies, this model is durable and cost-efficient.

3. The HRC60, hard chrome-plated crankshafts on both sides of the nut former and main spindle in the center are made of alloy brass, which are durable, impact-proof, heavy-duty, and wear-resistant.

4. Well-organized punch table are easy to adjust and can be adjusted separately from left to right, up and down. Even an inexperienced operator can easily adjust/replace dies/punches.

5. Front kick-out mechanism is easy-t0-operate and its movement can easily be synchronized with the reversing movement of main slide, which keeps work pieces in the dies.

6. The round, clean-cut section is vertical to feeding mechanism and cooperates with the forming process. Meanwhile, a non-reversible bearing is installed in the feeding mechanism to prevent material reversing, ensuring the stability of feeding mechanism.

7. Quick-change nut-clipping table and clip piece-positioning mechanism, plus adjustable lid on the shaft of clip pieces enhance nut former capacity.

Specification :

Six-die long-stroke nut shapers – SL Series
SPCIFICATION / MODEL 11B-6SL 14B-6SL 19B-6SL 22B-6SL 24B-6SL 32B--6SL 36B-6SL 41B-6SL 45B-6SL
FORGING STATION (MM) 6 6 6 6 6 6 6 6 6
CUT-OFF DIA. MAX. (MM) 12 15 20 22 26 32 36 42 46
CUT-OFF LENGTH MAX. (MM) 30 45 60 70 75 85 90 95 100
P.K.O. LENGTH MAX. 10 14 19 22 24 32 36 41 45
KICK-OUT LENGTH MAX. (MM) 38 53 68 78 88 105 113 123 128
CUT-OFF QUILL (DXL) (MM) 27×30 35×40 47×40 50×50 58×60 78×70 98×80 118×90 128×100
MAIN DIE HOLE (DXL) (MM) 40×40 50×60 65×80 75×90 85×100 105×110 120×120 140×130 150×140
DIES PITCH (MM) 50 60 78 90 100 126 145 168 180
PUNCH HOLE (DXL) (MM) 30×73 40×120 55×160 60×165 70×195 80×210 90×230 100×250 120×270
RAM STROKE (MM) 100 150 200 220 240 280 320 340 360
FORGING POWER (TON) 50 95 170 250 320 450 550 700 800
PRODUCTS SPECIFICATION Φ11×35 Φ14×50 Φ20×65 Φ22×75 Φ26×85 Φ32×100 Φ36×110 Φ42×120 Φ45×125
NUT M5 M8 M12 M14 M16 M24 M27 M30 M33
MAX. OUTPUT (PCS / MM) 90 80 70 70 65 60 55 50 50
MAIN MOTOR (HP) 20 40 50 75 100 150 200 250 300
LUBRICANT MOTOR (HP) 1 1 1 2 2 2 2 2 2
COOLANT MOTOR (HP) 0 0 1 1 1 1 1 1 1
LUBRICANT OIL (L) 150 150 200 250 350 350 400 400 450
COOLANT OIL (L) 80 100 150 150 150 200 250 250 250
AIR PRESSURE(KG/CM) 4 4 4 5 5 5 5 5 5
APPROX. WT. (TON) 6.5 10 20 30 38 58 80 110 130
MACHINERY SIZE (M) 3.0×1.8 3.6×2.1 5.0×2.6 5.5×3.0 6.3×3.3 7.35×3.9 7.7×4.2 9.8×5.0 8.5×5.5
Six-die long-stroke nut shapers – S Series
SPCIFICATION / MODEL 11B-6S 14B-6S 19B-6S 22B-6S 24B-6S 32B--6S 36B-6S 41B-6S 45B-6S
FORGING STATION (MM) 6 6 6 6 6 6 6 6 6
CUT-OFF DIA. MAX. (MM) 12 15 20 22 26 32 36 42 46
CUT-OFF LENGTH MAX. (MM) 15 20 35 40 45 50 55 60 65
P.K.O. LENGTH MAX.(MM) 10 14 19 22 24 32 36 41 45
KICK-OUT LENGTH MAX. (MM) 23 28 43 48 55 58 63 68 73
CUT-OFF QUILL (DXL) (MM) 27×30 35×40 47×40 50×50 58×60 78×70 98×80 118×90 128×100
MAIN DIE HOLE (DXL) (MM) 40×40 50×60 65×80 75×90 85×100 105×110 120×120 140×130 150×140
DIES PITCH (MM) 50 60 78 90 100 126 145 168 180
PUNCH HOLE (DXL) (MM) 30×73 40×120 55×160 60×165 70×195 80×210 90×230 100×250 120×270
RAM STROKE (MM) 80 90 120 140 150 160 180 190 200
FORGING POWER (TON) 50 95 170 250 320 450 550 700 800
PRODUCTS SPECIFICATION Φ11×20 Φ16×25 Φ20×40 Φ22×45 Φ26×50 Φ32×55 Φ36×60 Φ42×65 Φ45×70
NUT M5 M8 M12 M14 M16 M24 M27 M30 M33
MAX. OUTPUT (PCS / MM) 140 125 100 85 80 70 65 55 55
MAIN MOTOR (HP) 20 30 50 75 100 150 200 250 300
LUBRICANT MOTOR (HP) 1 1 1 2 2 2 2 2 2
COOLANT MOTOR (HP) 0 0 1 1 1 1 1 1 1
LUBRICANT OIL (L) 150 150 200 250 350 350 400 400 450
COOLANT OIL (L) 80 100 150 150 150 200 250 250 250
AIR PRESSURE(KG/CM) 4 4 4 5 5 5 5 5 5
APPROX. WT. (TON) 6 8.5 18 26 34 53 72 102 120
MACHINERY SIZE (M) 3.0×1.8 3.6×2.1 5.0×2.6 5.5×3.0 6.3×3.3 7.35×3.9 7.7×4.2 9.8×5.0 8.5×5.5
Language
Main Menu